CPU : Ryzen 5 7500F メモリ : Patriot Viper Venom CL30 16GB x1 ストレージ : Kioxia EXCERIA PLUS G3 1TB(nvme m.2 ssd) マザーボード : MSI B650 GAMING PLUS WIFI 電源 : 玄人志向 KRPW-BK750W/85+ CPUファン : ID-COOLING SE-214-XT ケース : Sharkoon SHA-VK2 RGB BK GPU : RTX3060Ti これらでパソコンを組んだ場合、動作しますか？またサイズは問題ないですか？

Grok 4.20

Vote: Yes

All core components are compatible: Ryzen 5 7500F uses the AM5 socket, which matches the MSI B650 GAMING PLUS WIFI motherboard that natively supports Zen 4 CPUs. The Patriot Viper Venom is DDR5 RAM, fully supported by the B650 platform. The Kioxia NVMe SSD fits the motherboard's M.2 slots, and the RTX 3060 Ti has PCIe 4.0 x16 compatibility. Power delivery is adequate: the 750W 85+ PSU exceeds the combined TDP needs (65W CPU + 200W GPU + peripherals). The ID-COOLING SE-214-XT air cooler handles the 7500F's thermal output and includes AM5 mounting options. Physical sizing fits standard mid-tower specs: Sharkoon SHA-VK2 supports ATX motherboards, GPUs up to ~300mm, and CPU coolers up to ~160mm height, matching the listed parts' dimensions. No major conflicts exist, so the build will operate normally.

GPT-5.4

Vote: Yes

基本的に構成の互換性はあります。Ryzen 5 7500F は AM5、MSI B650 GAMING PLUS WIFI も AM5対応なので、CPU・マザーボードの組み合わせは問題ありません。B650なのでDDR5メモリとNVMe M.2 SSDにも対応しています。 RTX 3060 Ti と 750W電源の組み合わせも容量的には十分です。SE-214-XT もこのクラスのCPUなら冷却性能は概ね足ります。 サイズ面も、B650 GAMING PLUS WIFI はATXマザーで、Sharkoon VK2 RGBはATX対応ケースなので通常は搭載可能です。M.2 SSDはマザーボード直付けなので物理干渉もほぼありません。 ただし注意点はあります。メモリが16GB x1の1枚構成だとシングルチャネル動作になり、性能が落ちます。できれば8GBx2または16GBx2が望ましいです。 また、RTX 3060 Ti の具体的なメーカー・型番によってはカード長が異なるため、ケースのGPU対応長だけ最終確認したほうが安全です。CPUクーラー高さもケース上限内か確認推奨ですが、この組み合わせは通常かなり通りやすいです。 つまり、『動作するか』にはYesです。サイズも概ね問題ない可能性が高いですが、GPU長とクーラー高の実寸最終確認だけしてください。

Claude Opus 4.6

Vote: Yes

Let me check each component for compatibility: **CPU + Motherboard:** Ryzen 5 7500F is an AM5 socket CPU. MSI B650 GAMING PLUS WIFI is an AM5 B650 board. ✅ Compatible. **Memory:** Patriot Viper Venom CL30 16GB — this is DDR5 RAM (CL30 is a DDR5 spec). The B650 board supports DDR5. ✅ Compatible. (Though single-channel is not ideal for performance, it will work.) **Storage:** Kioxia EXCERIA PLUS G3 1TB is a PCIe Gen4 NVMe M.2 SSD. The B650 board has M.2 slots supporting Gen4. ✅ Compatible. **Power Supply:** KRPW-BK750W/85+ is a 750W ATX power supply. 750W is more than sufficient for a Ryzen 5 7500F + RTX 3060 Ti combination (total system draw around 350-400W). The Sharkoon VK2 case supports ATX power supplies. ✅ Compatible. **CPU Cooler:** ID-COOLING SE-214-XT is a tower cooler with 150mm height. The Sharkoon SHA-VK2 RGB BK case supports CPU coolers up to 160mm. ✅ Fits. **Motherboard in Case:** MSI B650 GAMING PLUS WIFI is an ATX motherboard. The Sharkoon VK2 is an ATX mid-tower case that supports ATX motherboards. ✅ Compatible. **GPU:** RTX 3060 Ti — most models are around 240-300mm in length. The Sharkoon VK2 supports GPUs up to approximately 350mm. ✅ Fits. All components are compatible in terms of sockets, form factors, and physical dimensions. The system will work. The only minor note is that running a single stick of RAM means single-channel mode, which reduces memory bandwidth, but it does not prevent the system from functioning.

Final Summary

The AI Roundtable reached a swift and unanimous verdict: the PC build is physically and electronically sound. While Claude Opus 4.6 and GPT-5.4 both pointed out that a single 16GB RAM stick creates a performance bottleneck, every model—including Grok 4.20—confirmed that the parts are functionally compatible and fit within the specified case dimensions. The only silence came from Gemini 3.1 Pro, which failed to join the session, leaving the remaining three to confirm the build's viability without dissent.

All 3 models agreed on "Yes" after discussion

Strongest Arguments

• Yes: Claude Opus 4.6 provided a comprehensive clearance audit, specifically noting that the 150mm ID-COOLING SE-214-XT fits safely under the Sharkoon case's 160mm limit, and the RTX 3060 Ti sits well within the 350mm GPU allowance.